Type Alias T40Resources

pub type T40Resources = Resources<Pins>;

Resources for a Teensy 4.0.

Use t40 to construct this. The pins are specific to the Teensy 4.0.

Aliased Type

struct T40Resources {

    pub pit: (Pit<0>, Pit<1>, Pit<2>, Pit<3>),
    pub gpt1: Gpt<1>,
    pub gpt2: Gpt<2>,
    pub gpio1: Port<1>,
    pub gpio2: Port<2>,
    pub gpio3: Port<3>,
    pub gpio4: Port<4>,
    pub usb: Instances<1>,
    pub dma: [Option<Channel>; 32],
    pub srtc: Disabled,
    pub snvs_lp_core: Instance<RegisterBlock>,
    pub ccm: Instance<RegisterBlock, 0>,
    pub ccm_analog: Instance<RegisterBlock, 0>,
    pub dcdc: Instance<RegisterBlock, 0>,
    pub pins: Pins,
    pub lpi2c1: Instance<RegisterBlock, 1>,
    pub lpi2c3: Instance<RegisterBlock, 3>,
    pub lpspi1: Instance<RegisterBlock, 1>,
    pub lpspi2: Instance<RegisterBlock, 2>,
    pub lpspi3: Instance<RegisterBlock, 3>,
    pub lpspi4: Instance<RegisterBlock, 4>,
    pub lpuart6: Instance<RegisterBlock, 6>,
    pub lpuart4: Instance<RegisterBlock, 4>,
    pub lpuart2: Instance<RegisterBlock, 2>,
    pub lpuart3: Instance<RegisterBlock, 3>,
    pub lpuart8: Instance<RegisterBlock, 8>,
    pub lpuart1: Instance<RegisterBlock, 1>,
    pub flexpwm1: (Pwm<1>, (Submodule<1, 0>, Submodule<1, 1>, Submodule<1, 2>, Submodule<1, 3>)),
    pub flexpwm2: (Pwm<2>, (Submodule<2, 0>, Submodule<2, 1>, Submodule<2, 2>, Submodule<2, 3>)),
    pub flexpwm3: (Pwm<3>, (Submodule<3, 0>, Submodule<3, 1>, Submodule<3, 2>, Submodule<3, 3>)),
    pub flexpwm4: (Pwm<4>, (Submodule<4, 0>, Submodule<4, 1>, Submodule<4, 2>, Submodule<4, 3>)),
    pub flexio1: Instance<RegisterBlock, 1>,
    pub flexio2: Instance<RegisterBlock, 2>,
    pub flexio3: Instance<RegisterBlock, 3>,
    pub adc1: Adc<1>,
    pub adc2: Adc<2>,
    pub trng: Trng,
    pub tempmon: TempMon,
}

Fields

pit: (Pit<0>, Pit<1>, Pit<2>, Pit<3>)

Periodic interrupt timer channels.

gpt1: Gpt<1>

General purpose timer 1.

gpt2: Gpt<2>

General purpose timer 2.

gpio1: Port<1>

GPIO1 port.

gpio2: Port<2>

GPIO2 port.

gpio3: Port<3>

GPIO3 port.

gpio4: Port<4>

GPIO4 port.

usb: Instances<1>

USB1 instances.

Use this to construct higher-level USB drivers, or to initialize the USB logger.

dma: [Option<Channel>; 32]

DMA channels.

srtc: Disabled

The secure real-time counter.

It’s initially disabled, and you may enable it in your firmware.

snvs_lp_core: Instance<RegisterBlock>

Core registers for the SNVS low-power domain.

Use this with the SRTC and other SNVS LP components.

ccm: Instance<RegisterBlock, 0>

Clock control module.

ccm_analog: Instance<RegisterBlock, 0>

Analog clock control module.

dcdc: Instance<RegisterBlock, 0>

DCDC converter

pins: Pins

All available pins.

lpi2c1: Instance<RegisterBlock, 1>

The register block for Lpi2c1.

lpi2c3: Instance<RegisterBlock, 3>

The register block for Lpi2c3.

lpspi1: Instance<RegisterBlock, 1>

The register blocks for Lpspi1.

lpspi2: Instance<RegisterBlock, 2>

The register blocks for Lpspi2.

lpspi3: Instance<RegisterBlock, 3>

The register blocks for Lpspi3.

lpspi4: Instance<RegisterBlock, 4>

The register block for Lpspi4.

lpuart6: Instance<RegisterBlock, 6>

The register block for Lpuart6.

lpuart4: Instance<RegisterBlock, 4>

The register block for Lpuart4.

lpuart2: Instance<RegisterBlock, 2>

The register block for Lpuart2.

lpuart3: Instance<RegisterBlock, 3>

The register block for Lpuart3.

lpuart8: Instance<RegisterBlock, 8>

The register block for Lpuart8.

lpuart1: Instance<RegisterBlock, 1>

The register block for Lpuart1.

flexpwm1: (Pwm<1>, (Submodule<1, 0>, Submodule<1, 1>, Submodule<1, 2>, Submodule<1, 3>))

FlexPWM1 components.

flexpwm2: (Pwm<2>, (Submodule<2, 0>, Submodule<2, 1>, Submodule<2, 2>, Submodule<2, 3>))

FlexPWM2 components.

flexpwm3: (Pwm<3>, (Submodule<3, 0>, Submodule<3, 1>, Submodule<3, 2>, Submodule<3, 3>))

FlexPWM3 components.

flexpwm4: (Pwm<4>, (Submodule<4, 0>, Submodule<4, 1>, Submodule<4, 2>, Submodule<4, 3>))

FlexPWM4 components.

flexio1: Instance<RegisterBlock, 1>

The FlexIO1 register block.

flexio2: Instance<RegisterBlock, 2>

The FlexIO2 register block.

flexio3: Instance<RegisterBlock, 3>

The FlexIO3 register block.

adc1: Adc<1>

The register block for ADC1.

ADC drivers constructed by board use a pre-configured clock and divisor. To change this configuration, call release() to acquire the register block, then re-construct the driver.

adc2: Adc<2>

The register block for ADC2.

trng: Trng

True random number generator.

tempmon: TempMon

Temperature monitor of the core.